Blog
Notes on 3D printing, filament and production
Writing from the AMENT Research Team: from filament quality to choosing a printer, from print-farm economics to AI-assisted production with AMENT Hive.
Featured
Hive and print farms23 min read
AMENT Hive guide: AI print farm management software
A full walk through AMENT Hive, AI-assisted production software for 3D print farms: what it does, how it works, how to set it up and what it does not do yet.
Read
All articles
3D printing12 min read
How to choose an FDM 3D printer: a buying guide for home and farm
Choosing a printer starts with the parts you will print, not a list of brands. We work through the factors that actually change the decision, from motion system to network features.
Read
Filament11 min read
How to judge 3D printer filament quality: a buyer's checklist
Good filament is defined by a few things you can measure, not by the claims on the box. What to check in the first ten minutes with a new spool, and how to test it at home.
Read
Filament10 min read
Filament colour consistency: lot variation, ΔE and matching
Why can two spools with the same colour name look different side by side? How filament colour is made and measured, and how to keep the same look for months.
Read
Filament9 min read
Filament types compared: PLA, PETG, ABS, ASA, TPU, PA and PC
Nine common filament types side by side: what each does well, what it asks of your printer and which parts it makes sense for. With one big comparison table.
Read
3D printing12 min read
Multicolour 3D printing: AMS, MMU, tool changers and purge waste
From single-nozzle feeders to tool changers: how multicolour systems work, where filament is lost at every colour change, and practical ways to waste less.
Read
3D printing10 min read
3D printing cost per part: how to calculate the real cost
A printed part costs far more than the grams it takes off the spool. We separate the hidden items and bring them together in one worked example.
Read
3D printing10 min read
Nozzles and hotends explained: materials, sizes, flow and care
The nozzle is the cheapest part of a printer and one of the most decisive. Its material, its size and the hotend behind it set what you can print, how fast, and how much detail you keep.
Read
3D printing12 min read
Bed adhesion and build plates: PEI, glass and garolite guide
A good build plate grips hard while printing and lets go once it cools. Surface choice, first layer, cleaning and the right material pairing set that balance together.
Read
3D printing10 min read
Selling 3D printed products online: Trendyol, Shopify, Etsy
Buying a printer is easy; building a 3D printing business that sells steadily is not. A roadmap for makers selling online from Türkiye, from product choice to scale.
Read
Filament10 min read
Sustainable 3D printing: waste, recycling and the truth about PLA
3D printing isn't green by default, but good habits make it far less wasteful. An honest look at where the waste comes from, recycled filament and PLA's compostability claims.
Read
Hive and print farms11 min read
Print farm management software: a guide to choosing one
As printer count grows, the work shifts from printing to operations. A neutral guide to what print farm software does, how to choose it and the kinds of tools on the market.
Read
Hive and print farms10 min read
AI for 3D print farms: what it can realistically do today
AI can answer questions, prepare suggestions and spot failures in a print farm. It should not run printers on its own. Where the line sits, and why.
Read
Hive and print farms11 min read
Order-to-print automation for 3D print farms: a guide
Orders arrive from several channels; printing happens in one workshop. This is how to automate the steps in between, and which ones should stay with a person.
Read
Hive and print farms11 min read
Production planning for 3D print farms: plates, printers, shifts
Twenty printers, a hundred orders, six colours and one shift. At some point the plan no longer fits in anyone's head. These are the rules of a good production plan, and how Hive applies them.
Read
Hive and print farms11 min read
Cloud slicing for 3D print farms: one slicer for every brand
Every brand has its own slicer and every computer its own settings. As a farm grows, that scatter turns into mistakes. Here is why slicing belongs in one place, and how it works in Hive.
Read
Hive and print farms11 min read
Remote 3D printer control for print farms, done safely
Remote control saves the hours you are not at the farm, but set up badly it means a file printed onto a full plate or a command that runs hours late. Here are the rules of a safe setup, and where Hive stands today.
Read
Hive and print farms13 min read
Filament stock forecasting for 3D print farms: a practical guide
Filament tends to run out at the worst moment: overnight, on shipping day, in your best-selling colour. This guide covers measuring use, timing reorders and how Hive tracks it for you.
Read
Hive and print farms12 min read
Print failure detection and quality control for print farms
Failures are part of running a print farm; what matters is seeing them early and recording why, so they happen less. This guide covers failure types, camera detection, quality reports and a maintenance routine.
Read
Hive and print farms12 min read
Print farm notifications and shop-floor displays: a team guide
A print that finishes at night should not sit on the plate until morning, and a failure should not go unnoticed for hours. This guide covers getting alerts to the right person on the right channel, and a shared view of the floor.
Read
Hive and print farms11 min read
Connect Claude to your print farm with MCP: setup and safety
An AI app such as Claude can read your print farm's data through the Model Context Protocol (MCP). This guide covers how the connection is set up and where the line is drawn.
Read
Comparisons14 min read
AMENT Hive vs Printago: print farm software compared
Two print farm platforms, side by side and fairly. Printago is mature and global; Hive is newer and built for farms in Türkiye.
Read