Short answer
The real cost of a 3D printed part is the sum of seven items: filament (grams × price per kg), machine time (depreciation and maintenance), electricity (power × hours × tariff), labour, failure rate, packaging and, if you sell online, marketplace commission. Most makers only count the filament, yet labour and failures together often cost as much, sometimes more. Divide by the success rate at the end, and work commission backwards as a share of the selling price.
Key takeaways
- Filament is often not the largest item; labour and failures together can exceed it.
- Turn the printer into an hourly cost: purchase price over expected hours, plus maintenance and wear parts.
- Electricity is usually small per part, but a night tariff can matter for long prints.
- Add failures by dividing production cost by (1 − failure rate), not by adding a percentage.
- Commission is a share of the price: break-even price is cost divided by (1 − commission rate).
Why the cost of a 3D print is more than filament
Ask most makers what a part costs and they check the grams in the slicer and multiply by the spool price. That number is not wrong, just incomplete. The printer wears a little every hour, the nozzle wears, someone clears the plate, some prints end up in the bin, the product goes into a box and the marketplace takes its share.
Each item looks small on its own. Together they can double or triple the filament cost. If you price by the gram alone, you can lose money on every sale and only notice months later.
This guide splits the cost into seven items, gives a simple way to calculate each one, and then combines them in one example. Every figure in the example is illustrative: round values chosen to show how the calculation works, not real prices or measurements. Put your own numbers in.
How to calculate filament cost
The base formula is simple: grams × price per kg ÷ 1000. A 50 g part from a spool that costs 1,000 TL per kg uses 50 TL of filament. Take the grams from your slicer; most slicers show an estimated filament weight once a plate is sliced.
The catch is that the grams you count must include more than the part itself. Supports, brims, skirts and, in multicolour printing, the purge and prime tower all leave the spool too. On a multicolour plate the purged filament can weigh more than the parts.
Count the end of the spool
The last few metres on a spool are often too short for a print and get set aside. Prints spoiled by damp filament add to the bill as well. Leaving a small allowance on the price per kg is realistic. Keeping filament dry shrinks that allowance; our storage and drying guide explains how.
Machine cost per hour: depreciation, maintenance and wear
A printer feels like a one-off purchase, but every print uses up a little of it. The way to make that visible is to turn the printer into an hourly cost. Then a two-hour part and a twelve-hour part carry different machine shares, as they should.
- 1
Work out depreciation
Divide the purchase price by the total print hours you expect from the machine. You set the lifetime yourself, so be conservative: in a fast-moving market you may want to replace a printer before it physically wears out.
- 2
Add maintenance and wear parts
Add up a year of nozzles, build plates, PTFE tubes, belts, fans and lubrication, and divide by that year's print hours. Abrasive filaments (carbon or glass filled) wear nozzles faster, so raise the share for those products.
- 3
Spread the hourly cost over the parts
Multiply the hourly cost by the plate's print time and divide by the number of parts on the plate. If four parts fit on one plate, the machine share is split four ways.
A common mistake is to ignore idle hours. If a printer sits all night with a finished plate, those hours still depreciate the machine but are charged to no part. Knowing your real utilisation is what makes the hourly figure honest.
How to calculate a 3D printer's electricity cost
The formula: average power (kW) × print time (hours) × tariff (per kWh). The power on the printer's label is the peak draw with the heaters on; the average over a print is well below it. Draw is high while the bed heats up, then the thermostat cycles to hold the temperature.
The most reliable way is a plug-in energy meter: measure the total kWh of one complete print. An enclosed printer running a material that needs a hot bed, such as ABS, in a cold workshop draws more, so measure under your own conditions.
An illustrative example
A printer averaging 150 W (0.15 kW) uses 0.9 kWh on a six-hour plate. At an example tariff of 3 TL per kWh, the plate costs 2.70 TL, or about 0.68 TL for each of four parts. These are not measurements or current tariffs; use your own reading and the unit price on your bill.
As you can see, electricity is a small item for most PLA and PETG parts. With many printers and long prints the total bill still grows. In Türkiye the multi-time tariff splits the day into three bands: day 06:00–17:00, peak 17:00–22:00 and night 22:00–06:00. Check with the unit prices on your bill and your distribution company whether switching to it suits you.
AMENT Hive has an optional night-tariff setting in planning: turn it on and long prints shift to cheaper electricity hours, with the saving shown. It only makes sense if someone will collect the finished plates in the morning.
Labour: preparation, plate removal and post-processing
A cost calculation that leaves out your own time is really saying you work for free. The day you hire someone, that cost appears at once and your prices stop working. So count labour from the start, at an hourly rate.
- Per plate: preparing the file, checking filament, starting the print, removing and cleaning the plate.
- Per part: support removal, deburring, sanding, assembly, quality check.
- Per order: packing, labelling, handing over to the carrier.
Divide per-plate work by the parts on the plate and add per-part work directly. A design that prints without supports, pops off the plate and needs no finishing can save more in labour than in filament. Time yourself for a week; estimates are almost always optimistic.
When you set the hourly rate, ask two questions: what would I pay someone to do this, and what else could I do with this hour? Using the higher of the two keeps you on the safe side. Include employer costs such as insurance and leave; gross pay alone understates the real cost of an hour.
How to include the failure rate in the cost
Every failed print uses filament, machine time, electricity and labour but produces nothing to sell. The good parts carry that cost. The right formula is production cost ÷ (1 − failure rate).
A 10% failure rate does not mean adding 10%. If 90 of 100 prints succeed, you divide the cost of 100 prints over 90 parts: a multiplier of 1/0.9, or about 1.11. The multiplier grows faster as failures rise; at 30% it reaches about 1.43.
Find the failure rate from records, not guesses: log every failed print with its cause. It varies a lot by product and printer; a tall, thin part may fail far more often than a short one with a wide base. Our troubleshooting guide covers the most common causes.
Hive learns how long each product really takes on each printer and how often it fails, and its quality report breaks the failure rate down by printer, product, filament and hour. That replaces two of your guesses (time and failures) with real data. Cost-per-part and profit analysis is still on Hive's roadmap, so for now the calculation itself is yours to build.
Packaging, commission and a worked example
Packaging means the box, filler, tape and label, counted per order. If you pay for shipping, add that too. Marketplace commission is different: it is a share of the selling price, not a cost you add. Work it backwards from the price: break-even price = total cost ÷ (1 − commission rate).
In the example below four parts fit on a plate and the plate takes six hours, so 1.5 hours per part. All values are illustrative. Commission rates vary by category and platform; check your category's current rate in your seller panel.
| Item | Calculation | Per part |
|---|---|---|
| Filament | 45 g × 600 TL/kg | 27.00 |
| Machine | 8 TL/hour × 1.5 hours | 12.00 |
| Electricity | 0.15 kW × 1.5 hours × 3 TL/kWh | 0.68 |
| Labour | 5 minutes × 180 TL/hour | 15.00 |
| Production subtotal | 54.68 | |
| Failure allowance | 54.68 ÷ (1 − 0.08) − 54.68 | 4.75 |
| Packaging | box, filler, label | 6.00 |
| Total cost | 65.43 | |
| Commission (20%) | 20% of the break-even price | 16.36 |
| Break-even price | 65.43 ÷ (1 − 0.20) | 81.79 |
Here filament is less than a third of the break-even price. Labour and failures together come close to the filament, and commission is twenty times the electricity. Break-even contains no profit; margin, returns and advertising sit on top of it. We cover the selling side in selling 3D printed products online.
Keeping your cost calculation current
A cost sheet built once and forgotten goes stale within months. Filament prices move, tariffs change, a new printer arrives, a new profile cuts a product's failure rate. Keep the calculation in a sheet and note the source of each line: invoice, measurement or estimate.
- Times from real print records, not the slicer's estimate.
- Grams logged per print, with purge tracked separately on multicolour products.
- Failures counted per product and per printer; an average hides the problem product.
- Estimates flagged, and replaced with measurements at the first chance.
With a few printers you can keep these records by hand. As the farm grows it makes more sense to leave the bookkeeping to software; we compare the options in our guide to print farm management software. You can try Hive free for 14 days; plans and pricing are here.
Frequently asked questions
How do you calculate the filament cost of a 3D print?
Multiply the part's weight in grams by the price per kg and divide by 1000. Take the grams from your slicer and include supports, brims and any multicolour purge. Remember to include delivery and taxes in the price per kg.
How much electricity does a 3D printer use?
It depends on the printer, bed temperature, material and room temperature, and the average draw is usually well below the peak power on the label. The most reliable way is to measure one print's total kWh with a plug-in energy meter and multiply by the unit price on your bill.
How do you include the failure rate in the cost per part?
Divide production cost by (1 − failure rate). At a 10% failure rate the multiplier is about 1.11, at 30% about 1.43. Find the rate from records kept per product and per printer rather than from a guess.
How should marketplace commission be included in pricing?
Commission is a share of the selling price, so it is not added to cost but worked backwards from the price. The break-even price is total cost divided by (1 − commission rate). Check your category's current commission rate in the seller panel.
How do you calculate depreciation for a 3D printer?
Divide the purchase price by the total print hours you expect from the printer to get hourly depreciation. Add the hourly share of a year's maintenance and wear parts. Then multiply the hourly cost by print time and divide by the parts on the plate.