AMENT Hive
Your 3D print farm, run with AI.
AMENT Hive is AI-assisted production software for 3D print farms: it brings the daily work together, from order to plate and from file to printer. Connect your orders. Connect your printers. Talk to your production. It is made for farms in Türkiye: Trendyol and ikas built in, an assistant that speaks Turkish, shipping deadlines and night electricity rates in the plan, prices in lira.
14-day free trial
How it works
AMENT Hive is AI-assisted production software for 3D print farms. It pulls Shopify, Trendyol and ikas orders into one queue, plans production, slices files in the cloud with OrcaSlicer, and monitors Bambu Lab, Creality, Snapmaker U1 and Klipper printers on one screen. Its AI assistant answers questions from the farm's real data but never takes a physical step on its own. There is a free plan; Pro can be tried free for 14 days with no card, and paid plans start at $19 a month.
From order to build plate.
Every step from an order to a finished 3D print, in one place and in sequence.
Orders come in
Automatically from Trendyol, ikas and Shopify, by hand for the rest. All in one queue, with Trendyol's shipping deadline on the order.
Files are matched
Each product is tied to an approved print file. Files are versioned and sliced in the cloud, and plates are packed to fit the most units for each printer model.
A plan is drafted
Hive drafts a plan around urgent work and due dates. It learns real print times and works with your shifts. You see it on a timeline and approve it.
Jobs go to printers
Upload and start are separate approvals. Before a print starts, the server checks the plate is clear, the printer is idle, the right filament is loaded and the file was sliced for that printer.
Production is tracked
Live status, cameras, a shop-floor screen and a TV board. When something goes wrong, you hear about it on your phone, by e-mail or in your team channel.
AMENT Intelligence
Advanced Materials & Intelligence
Ask the AI. The answer comes from production.
Hive AI reads your printers, orders, plan, filament and catalog. It answers questions like “Is anything failing?” or “Will this order be ready by 2 pm tomorrow?” with your real data.
AI production assistant
A chat inside the app that works with your own farm's data. With a little setup, you can ask it from Telegram and WhatsApp too.
It prepares, you approve
Say “send this to an idle K2” and it picks the printer, checks the filament and prepares an approval card. Colour and maintenance changes come as cards too.
Works with Claude and ChatGPT
Hive's MCP server lets you ask about your farm from the AI tool you already use.
The red line. The assistant only prepares. It never starts a print, uploads a file or commands a printer on its own. A person approves every physical step, the server runs its checks again at that moment, and every step is logged.
Modules
What Hive does today
Everything listed here is in the app today. Sending to printers is being validated in the field with our first farms.
Orders and stores
Trendyol, ikas, Shopify and manual orders; shipping deadlines and unmatched products. An order cancelled in the store is put on hold, never silently deleted.
Planning
Draft plans built around urgency and due dates, a timeline, approval. Started jobs never move; long prints shift to the evening, or to cheaper electricity hours if you like.
Print times and estimates
Learns how long each product really takes on each printer. “When will it be ready?” gets two answers: most likely and latest.
Catalog and files
An approved print file per product; 3MF, STL and G-code, with version history.
Cloud slicing and plate layout
Slicing with nothing to install, saved setting sets and colour mapping. The plate editor works out the most units per plate for each printer model.
Full slicer in the browserAdd-on
All of OrcaSlicer in a browser tab; every saved change becomes a new file version.
Printers and Farm Connector
Bambu Lab, Creality, Snapmaker U1 and any Klipper/Moonraker printer. A connector on a computer at the farm finds printers on the network and brings in live status and cameras.
Shop-floor and TV screens
A phone-friendly screen for operators: plate cleared, done, failed in one tap. A live printer board for the workshop TV.
Filament
Loaded material per slot, grams per print, spool stock and price per kg. A forecast of when each runs out and a list of what to reorder.
Quality and maintenance
Optional camera failure detection that sends a photo alert and never stops a print on its own. Quality reports and maintenance reminders by print hours.
Team and notifications
Invites and roles: owner, production manager, operator, technician, viewer. Alerts by phone, e-mail, Telegram, Discord and Slack; an app you can add to your home screen.
From the team that makes the material.
AMENT started with filament; Hive grew out of the same production questions, answered in software. We think about the material and the farm that prints it as one.
Printers
Which printers does it work with?
Farm Connector talks to printers on your local network; you never expose them to the internet.
| Brand | Models | Live status and camera | Send jobs | Remote control |
|---|---|---|---|---|
| Bambu Lab | A1, A1 mini, P1S, P2S, X1, H2D | Yes (camera on A1 and P1) | Yes, with AMS slot mapping · being validated in the field | Pause, resume, stop, clear error, calibration · being validated in the field |
| Creality | K2, K2 Plus, Hi | Yes | Yes · being validated in the field | Pause, resume, stop · being validated in the field |
| Creality | K1C (stock firmware) | Yes | No, monitoring only | No |
| Snapmaker | U1 | Yes | Yes · being validated in the field | Pause, resume, stop · being validated in the field |
| Klipper | Any printer running Moonraker | Yes | Yes · being validated in the field | Pause, resume, stop, homing · being validated in the field |
Sending files to Bambu Lab printers from third-party software requires Developer Mode; that is Bambu's rule. Only an owner or production manager can send remote commands, and each one is confirmed.
Set it up with us
You can try Hive free for 14 days, with no card. If you like, tell us about your farm: we'll connect your printers and store with you and run the first dispatches together. New releases ship often and your feedback shapes them.
FAQ
Frequently asked questions
What is AMENT Hive?
AMENT Hive is AI-assisted production software for 3D print farms, made by AMENT. It brings orders, planning, cloud slicing, sending jobs to printers and live monitoring into one screen, and a person approves every physical step.
Which 3D printers does AMENT Hive support?
AMENT Hive works with Bambu Lab (A1, A1 mini, P1S, P2S, X1, H2D), Creality (K2, K2 Plus, Hi; K1C for monitoring only), Snapmaker U1 and any Klipper/Moonraker printer. A Farm Connector installed on a computer at the farm (Mac, Windows or Linux) finds printers on the local network and brings their live status and cameras into Hive.
Which online stores does AMENT Hive connect to?
AMENT Hive brings in orders automatically from Trendyol, ikas and Shopify, and orders from other channels can be entered by hand. All orders land in one queue with Trendyol's shipping deadline shown on each, and an order cancelled in the store is put on hold, never silently deleted.
Does Hive AI start prints on its own?
No. Hive AI only prepares: it picks a printer, checks the filament and prepares an approval card, but it never starts a print, uploads a file or commands a printer by itself. A person approves every physical step, the server re-runs its checks at that moment, and every step is logged.
Is AMENT Hive available now?
Yes. You can sign up for AMENT Hive at hive.ament.ai and try everything in Pro free for 14 days with no card; if you don't pick a plan when the trial ends, your farm continues on Free. Sending jobs to printers is being validated in the field with our first farms; for setup help, use the form at ament.ai/en/hive or write to hello@ament.ai.
How much does AMENT Hive cost?
AMENT Hive has four plans: Free (2 printers), Starter at $19, Pro at $49 and Business at $129 per month, with 2 months free on yearly billing. Pro can be tried free for 14 days with no card, and the full OrcaSlicer add-on is $15 a month. Details are at ament.ai/en/hive/pricing.
How does AMENT Hive protect my data and printers?
Printers are never exposed to the internet: the Farm Connector talks to them on the local network and connects outward only to Hive. Each farm's data is kept separate from every other farm's, printer access codes and API keys are stored encrypted, and every change is written to an audit log.
Does AMENT Hive work in Turkish?
Yes. AMENT Hive was made with farms in Turkey in mind: the interface and the AI assistant work in Turkish, Trendyol and ikas are built in, and planning accounts for shipping deadlines and night electricity rates.
Does AMENT Hive slice files? Can I use OrcaSlicer?
Yes. AMENT Hive slices in the cloud with OrcaSlicer, with nothing to install, and includes setting sets, colour mapping and a plate editor that fits the most units per plate for each printer model. The full OrcaSlicer is also available in the browser as an add-on module, where every saved change becomes a new file version.
Can I ask Hive questions from Claude, ChatGPT, Telegram or WhatsApp?
Yes. AMENT Hive's MCP server lets you ask about your farm from AI tools such as Claude and ChatGPT, and with some setup the same assistant answers on Telegram and WhatsApp. Approvals are always given in the Hive app.