Knowledge centre
Open knowledge, for less trial and error.
The AMENT knowledge centre is a set of short, clear guides to 3D printing filament: what a setting changes, and what a symptom points to.
Guides
New to this? Start with choosing a material.
Choosing a material
PLA or PETG? A short guide to choosing filament
Choosing filament starts with what the part has to do, not a polymer name. Where PLA and PETG are strong, where they fall short, and when to look further.
Read the guide6 sections
Storage and drying
Filament storage and drying: why moisture matters
Filament absorbs moisture from the air, and that moisture turns to steam in the nozzle. How to spot damp filament, store it well and dry it safely.
Read the guide5 sections
Print settings
3D print settings: what to change, and why
Nozzle temperature, first layer, cooling, retraction, speed and flow: what each 3D print setting affects, and an orderly way to dial in a new filament.
Read the guide7 sections
Troubleshooting
3D print troubleshooting: from symptom to cause
Stringing, warping, under-extrusion, poor bed adhesion and damp filament: the likely causes of common 3D printing problems, and the order to check them in.
Read the guide7 sections
Lot data
What filament lot data means
What a filament lot number records and what it tells you: the traceability system AMENT is building for repeat orders, troubleshooting and the right documents.
Read the guide5 sections
Documents and profiles
Data sheets, safety data sheets and printer profiles, specific to product and version. Published with production.
| Product | Technical data sheet | Safety data sheet | Printer profiles |
|---|---|---|---|
| AMENT Core PLA | Pending | Pending | Pending |
| AMENT Core PETG | Pending | Pending | Pending |
In every document
- Version number and publication date
- Test method and sample conditions
- Print orientation and the profile used
- Which product and lot it applies to
We'll let you know when they're published.