Short answer
To manage filament stock well you need three numbers per colour and material: how much you use a day, how many days your supplier takes to deliver, and what is left on the shelf. The reorder point is daily use times lead time plus a safety buffer. AMENT Hive does this sum after every finished print: it keeps spool stock, splits consumption by colour and material, forecasts how many days each one will last and builds a list of what to reorder.
Key takeaways
- Reorder point = daily use × lead time + safety stock; work it out separately for each colour and material.
- Most use usually sits in a few colours: never run those out, and keep the long tail lean.
- Count the grams lost to failed prints and colour-change purge, or your forecast will always be optimistic.
- Hive takes every finished print out of the matching stock and shows days of cover and an order-by date.
- Writing a slot colour from Hive to the printer is live but still being validated on real printers.
Why does filament always run out at the wrong time?
Tracking filament on one printer is easy: you see the spool getting thin and buy another. With ten printers, fifteen colours and two materials it changes. Black PLA sits almost untouched for a week, then a large order lands and two spools are gone in three days. By the time the last spool is opened, the supplier's lead time has already passed.
The cause is rarely laziness. It is scattered information. Consumption lives inside the printers, stock on the shelf, demand in the store dashboard and lead times in supplier messages. Nobody keeps them in one table, so decisions are made by feel: "White looks low, let's order a box."
Feel goes wrong both ways. Too little stock holds up an order and misses a shipping deadline. Too much ties up cash and leaves opened spools soaking up moisture. With PETG and nylon that later becomes a print quality problem; our storage and drying guide covers that side in detail.
- Demand is lumpy: a handful of large orders can wreck the weekly average.
- The colour range is wide: every new colour is another stock line and another reorder decision.
- Lead times vary: a local supplier may take two days, an imported colour two weeks.
- Waste is invisible: failed prints, first-layer retries and purge towers in multicolour work rarely show up on their own.
How do you measure filament use per print and per printer?
A forecast is never better than the measurement behind it. The first job is knowing how many grams each print really used. There are three sources, each with its own blind spot.
| Source | How it works | Watch out for |
|---|---|---|
| Slicer estimate | The slicer writes a gram estimate per filament when it generates the G-code. | It knows nothing about failed or cancelled prints; it is a figure from before the print. |
| Printer counter | Klipper and some Creality printers report how much filament they have pushed, in millimetres. | Turning millimetres into grams needs the material's density and the filament diameter. |
| Scale | Weigh the spool before and after printing. | The most accurate, but nobody does it for every print at farm scale; ideal for a monthly count. |
In practice the best results come from collecting counter or slicer data for every print automatically and checking it against a scale once a month. The count shows the gap: if you keep coming up short, there is waste that is not being recorded.
Why use per printer matters
The same product uses almost the same grams on two printers, but the failure rate can differ. Watching use per printer shows which machine produces more waste. Sometimes that is the first sign of a nozzle problem, sometimes of a badly tuned first layer. We cover the failure side in print failure detection and quality.
How do you calculate a filament reorder point?
The reorder point is the threshold where you say "below this, order more". The logic is simple: the filament you will use while new spools are on their way must already be on the shelf, plus a buffer for demand you did not see coming.
- 1
Find daily use
Divide total use over the last few weeks by the number of days. Giving recent weeks a little more weight picks up seasonal shifts faster.
- 2
Write down a realistic lead time
The days from placing an order to the spool sitting on your shelf. Use what you actually experienced on the last few orders, not what the supplier promised.
- 3
Choose a safety stock
A few extra days of use, depending on how lumpy demand is. Higher for best sellers, lower for rare colours.
- 4
Work out the threshold
Reorder point = daily use × lead time + safety stock. Order on the day stock drops below it.
- 5
Decide how much to order
Enough to cover the lead time plus the next ordering cycle (say 30 days), rounded up to whole spools.
A worked example, with purely illustrative numbers: you use about 250 g of white PETG a day, the supplier takes 5 days and you want 2 days of safety. The threshold is 250 × 5 + 500 = 1,750 g. When less than two 1 kg spools are left, it is time to order.
The hard part is keeping this sum current for every colour and material, every day. A hand-kept sheet for fifteen lines is out of date within weeks. That is why the sum belongs where consumption is recorded, done automatically.
Managing your colour and material mix
In most farms, use concentrates in a few colours: black, white, grey and one or two signature colours. The rest arrive in occasional orders. Managing both groups with the same rule costs money and shelf space.
| Group | Stock approach | Why |
|---|---|---|
| High-use colours | Never run out; high safety stock, regular orders. | When this colour runs out, most production stops. |
| Medium use | Reorder point with a normal buffer. | Demand is readable and the forecast works well. |
| Rare colours | One spool, or buy when an order comes in. | An opened spool that sits for months absorbs moisture and ties up cash. |
Materials need the same separation. White PLA and white PETG are not one stock line, and two whites from different suppliers may not be one colour either. If you see shade differences when a product is printed from different batches, the checks in filament colour consistency help.
- First in, first out: put the older spool in front, and keep opened spools in a sealed box with desiccant.
- Keep batch information: try to print one order of a product from one batch.
- Record the price per kg: without it you cannot work out margin per part; see cost per part.
- Save the supplier link: do not lose time searching at the moment you need to order.
How AMENT Hive tracks and forecasts filament stock
AMENT Hive does the sum above where consumption is recorded. The Filament page has four tabs: Overview, Stock, Consumption and Forecast. All of them are live.
Stock: what is on the shelf?
You add each filament you keep with its material, colour, brand, spool weight and price per kg. Each line can also carry a reorder point, a lead time and a supplier link. When spools arrive you press Receive, when you count you press Count; every movement goes into a ledger, so you can see who changed what and when. Only owners and production managers change stock; the rest of the team reads it.
Consumption: grams per print and per printer
Every finished print is taken out of the stock line with the matching material and colour. Klipper and Creality printers report their own filament counters. Bambu Lab printers have no counter, so grams come from the sliced file once it is in Hive. The Consumption tab splits use by colour, material and printer, and filament that went into failed prints shows up separately as failed-print waste.
If something is printed in a material and colour you do not keep in stock, Hive lists it under "printed this month without a stock item". A colour you forgot was on the shelf can then be tracked with one click.
Forecast: how many days left, and when to order?
Hive looks at daily use over recent weeks, with recent days weighing more and one-off spikes capped. It then adds what open orders still need: the grams of products not yet printed, with the colour from the order's variant. The result is a 30-day need and a band that says "most likely somewhere in here".
For each line, stock is divided by daily need to give days of cover. Subtract the lead time and you get an order-by date. Status comes in four states: critical (runs out before a new order could arrive), order soon (within the week, or below the reorder point), covered, and no use.
When a line gets close to its lead time, Hive sends a notification such as "White PETG lasts about 9 more days; order by Tuesday". The reorder list works out how many spools cover the lead time plus 30 days, rounded up to whole spools, and you can copy it straight into a message to your supplier.
You can also reach this through the assistant. Ask "Which filament is running low?" or "How much black PLA do I need a month?" and the answer comes from the same forecast. The assistant only reads; it does not change your stock records for you.
Seeing what is loaded: AMS, CFS and Snapmaker heads
What is loaded in the printer matters as much as what is on the shelf. A print that starts in the wrong colour wastes filament and machine hours. In Hive, each printer's card shows its loaded filament slot by slot: Bambu AMS, Creality CFS and Snapmaker U1 heads report their own filament, and Hive shows the colour, material and remaining percentage.
For an external spool, or a printer that does not report its filament, you enter what is loaded by hand. A manual value is marked "set by hand", and the printer's own report wins again as soon as it reports a new spool in that slot. Hive uses this in two places: to map a file's colours to the right slots when slicing, and in the check before a print starts, to see whether the right filament is loaded.
Changing a colour in Hive and writing it to the printer
You can change a slot's colour or material from Hive. By default only Hive is updated and nothing is sent to the printer. For Bambu and Snapmaker U1 there is an "Also apply on the printer" option: switch it on and Hive also writes the change to the printer through the Farm Connector, and marks it done once the printer itself reports the new filament.
Tell the assistant "make the Creality Hi pastel blue" and the same flow runs: it prepares an Apply / Discard card and you confirm the change. The AI never writes anything to a printer on its own.
A weekly filament routine for print farms
Software does the sums, but the habit comes from people. The routine below takes under half an hour and prevents most stock surprises.
- 1
Record deliveries straight away
When a parcel arrives, count the spools and add them with Receive. Entering the price paid per kg keeps the cost report current.
- 2
Look at the Forecast tab
Check the lines marked critical and order soon. If a large order is waiting, confirm that open orders are counted in the need.
- 3
Send the reorder list
Copy the reorder list and pass it to your supplier. If lead times keep stretching, update the lead time on the stock line too.
- 4
Clear up prints without a stock line
Either add the colours that were printed without a stock line, or ask why they were used; it may be a wrongly matched slot.
- 5
Weigh once a month
Weigh the opened spools and correct the record with Count. If the gap is large, look at waste and failed prints.
If you want to set up this kind of routine on your own farm, you can try Hive free for 14 days, and we can connect stock lines and printers together with you. See plans and pricing here.
Frequently asked questions
How many prints does one spool of filament last?
It depends heavily on the product. Dividing the spool's net weight by the slicer's gram estimate per print gives a rough number, but you also need to count failed prints and colour-change purge. Recording real use per print is more reliable than estimating it.
How do I set a filament reorder point?
Multiply average daily use by the supplier's real lead time and add a few days of safety stock. Order when stock drops below that threshold. Work it out separately for each colour and material, because use and lead time differ from line to line.
How does Hive measure filament use on Bambu Lab printers?
Bambu Lab printers do not report a filament counter, so Hive takes the grams from the sliced file in Hive and takes them out of the matching stock when the print finishes. Klipper and Creality printers report their own counters.
Does Hive stop a print when filament runs out?
No. Hive forecasts filament and notifies you when stock is low, but it never stops a printer on its own. When a Bambu printer pauses itself because of a problem such as running out of filament, Hive sends a notification; that alert is live but still being validated on real printers.
Does a colour I change in Hive also reach the printer?
By default only Hive is updated. For Bambu and Snapmaker U1, switching on "Also apply on the printer" writes the change to the printer as well. That feature is live but has not yet been tested on real printers, so do your first tries at the machine.